Hi everyone. Question is what bell housing to use. I just got a 1975 f350 and i have a 7.3 idi with low miles.truck has a FE motor in it and a granny 4 speed. Other the a 6.9 idi bell housing is there any others that will work? Thanks for any help

Hi on a 75 what other rear end besides a Dana 70 will bolt up? This for a dually rear end.Thanks Tony

Hi,I just got a 98 Ranger with the 3.0 and it came with a 94 3.0 motor. But the 98 motor isn't any good. And it runs off coil packs and no distributor and has a crank sensor. The 94 motor has a distributor. Is there any way I can take the harm. balancer off the 98 and put on the 94 motor. And...

I'm going to be doing ball joints on my 97 F350 crew 2wd. Question is will I need any other adapters then why comes with the press?

Hi guy on my 97 F350 crew cab with the 7.3 turbo diesel in it. My tank valve on the frame is broken. Where can I get one at? Ok does someone have a extra one? I just change my fuel pump as the guy I got it from that had it 7 or 8 years he never changed it. After I took it out and in the bottom...

Hi guys, I just got a 1997 F350 Crew cab DRW with the 7.3 Turbo diesel. With a auto trans. I need to know what years interchange with it. As far as body parts like front door and tailgate and rear bumper for know. Thanks Tony

Hi guys its been awhile since I have been in here. I have a chance to buy a 1986 F350 crew cab DRW. With the 6.9 IDI and a 4 speed trans. Body is really in good shape. Interior is n good shape as well. And yea it all depends on what someone is willing to pay for it. But is $3500 a reasonable...

Hi guys, My 77 F250 4x4 (lowboy) I need to replace the rearend. What rear of trucks would bolt up? Or what other truck/van would bolt in with little mods. Thanks Tony

Have a 77 Ford F250 4x4 (lowboy). 400 motor with a C6 trans. Motor and trans works like they should. Bed is the worst part of the body. Only reason im sell is need something bigger. I don't need any help selling it. No lowball offers. Asking $2000 OBO Email any questions to...

I finally got my rear sump oil pan and pickup tube dirt cheap.Question is when the dip stick is all the way in it only stick out the bottom of the tube about 3/4 of a inch.Is that right or does it have the wrong dip stick with it?And are the rear sump pans still a 5qt oil pan?Thanks alot guys

Are the outside mirrors off a 80's Ford F350 the same as what goes on our trucks.Im talking about the camper mirrors that mounts below the window.

I need a front spindle for a 77 Ford 3/4 ton Dana 44.I need the passenger side.Thanks

Hi guys I was wondering if anyone know if 8 lug 15 inch rims will fit the front axles on my truck.It has the dual piston cali. on it.I know on 2wd truck they will was wondering if they will fit a 4X4.I know where I can get a set at.

I need the rear hump oil pan for a 351/400 or a 400 motor.May also need the pickup tube for the oil pump.Let me know what you have and a price and some pics.Thanks

On my truck should it have a front or rear hump oil pan in it?

What is the different between a Dana 44 and a high pinion Dana 44?How do I tell what I have?Will the carrier and gears from one fit it either?

Hi guy,I was wondering if 3.54 gears would help my gas mileage any of make it worse.I have 4.10's know.I have a 400 with a C6 trans.As of right know running 33x12.50's tires.Thanks Tony

How big of a pain is it to put new seals and gasket in one?Do I need any special tools?Is there anything I should check when I do it?Thanks Tony

Has any one done this to one of our trucks?I have read up on it some and you can get the parts at a junkyard.I would like to see pics of one installed.I understand part of the write ups put not to sure about how to wire it back up after you install the new alter and remove to old wiring and...

I was wondering what tire size came on my 77 F250 4X4 from the factory?

Why is the steering shaft that goes between the steering column and gear box almost $300.Is there a cheaper why to fix the U joints in it?Mine is getting a little loose.Thanks Tony

Hi guys,As alot of you guys know I just got my 77 F250 4X4.And it has been doing alot of sitting brfore I got it.And was thinking about changing the oil in the front end and rear ends and the transfer case.But what oil and weight do I use?

How big of a pain is it to change a rear main seal in a 400?Whats all involved?I know you have to drop the oil pan.But what else?I need to repalce mine badly.Thanks Tony

Its a 77 Ford F250 4X4.It has the 400 in it and a C6 trans.It need some body work.Will work on the when I get some parts in.It runs good and drives good.Here is a couple pics what you guys think?Its been awhile since I have been here and it feels good to be back in a Ford too.

On a 77 F250 how new of a wheel will work on it?I want to get a set of used 16" wheels and wanted to know what year did the go to metic lug pattern.

What size tire is about the same as a 33X12.50X16.5?I want to switch to 16's.Besides 33's what other tires ae about the same size?Like 285X75 X16 and so on.Im not saying the 285 are the same.Thanks Tony

Does anyone have a rough idea what one may weighs.It has the 400 and auto trans.Tring to figure what weight tag to get for it.Thanks Tony

Its to quite in here.Where is everyone?Did everyone fall asleep?

What do you guys think is a good price range for it?I dont own it.Think about trading for it.But I have no idea what it is worth.I know it is worth what someone is willing to pay.It has a 460 with a auto trans.The worse rust is on the passenger cab corner.Here is a few pics the guy emailed...

Does anyone have a clue what a 97 E350 window van would weigh?It is the standard lehght not the maxivan.Thanks Tony