Hey guys new here and rather new to ford trucks and most things pre 80's. I grew up around Gm cars and trucks, though i did own and 91 topaz and repair my sisters 93 mustang. Im also a heavy duty diesel mechanic so feel free to be technical.
anyways i bought a 1977 F150 4x4, 351m, 4 speed that was used as a farm truck but has sat for 7 years. got the 351 mostly running (fighting rust plugging my fuel filters, a dead electric choke (power is good) ect. rebuild an 80's 2150 carb for it.
i have a few questions?
-does anyone have a emissions vacuum diagram for this model year? i found some for others years on this sight but i dont know about comparability. need to get egr plumed right for tags.......who cares after that.
-the clutch pedal sticks to the floor if it goes all the way down. i didnt see any grease fitting to the pivots an i blind?. how bad is it to rebuild or at lest get those assembly's lubed up
anyways i bought a 1977 F150 4x4, 351m, 4 speed that was used as a farm truck but has sat for 7 years. got the 351 mostly running (fighting rust plugging my fuel filters, a dead electric choke (power is good) ect. rebuild an 80's 2150 carb for it.
i have a few questions?
-does anyone have a emissions vacuum diagram for this model year? i found some for others years on this sight but i dont know about comparability. need to get egr plumed right for tags.......who cares after that.
-the clutch pedal sticks to the floor if it goes all the way down. i didnt see any grease fitting to the pivots an i blind?. how bad is it to rebuild or at lest get those assembly's lubed up
Attachments
Last edited: