Join Our Ford Truck Forum Today

Document your Ford truck project here and inspire others! Login/Register to view the site with fewer ads.

strike f350

Nice truck...good luck...hopefully ull be able to take this one home.

what engine and trans?
 

Truckin4life

Texas Chapter Leader
Looks good in the pics, but what does the frame look like, cab corners? Body mounts?

Bottom of the engine? Bottom of the cab? (check for oil from a leaky engine)

These kind of things are more important than what the wheels look like IMHO...

If the wheels are ugly, paint them black... They wont stand out as much.
 

BuzzGun79

Nov.TOTM 2012 / 2012 TOTY
2,388
55
nice lookin rig in the pic....if your interested go inspect & drive the vehicle if possible.cant hide nothing then.your taking a big risk if you buy from a photo..but thats my opinion.
 
It has a 400 auto says its rust free.. resent experiences have taught me that is a relitive term tho I found a 77 4spd 351 truck its great but id like an auto if I change steering colum transfer case tranny driveshafts n flor pan I would buy the 77 what would a swap like that cost these days one other question if I add 6 in suspension llift to a 77 lowboy frame will I need a longer drive shaft if I go auto could I use the 4spd driveshaft thanks for the tips
 
I found a 77 4spd 351 truck its great but id like an auto if I change steering
column transfer case tranny driveshafts n floor pan I would buy the 77 what
would a swap like that cost these days one other question if I add 6 in
suspension lift to a 77 lowboy frame will I need a longer drive shaft if I go
auto could I use the 4spd driveshaft thanks for the tips
It's best, and usually cheaper too, to get a parts truck for swaps like that.
Manual transmission trucks tend to be more expensive so swapping one to
automatic is going the-wrong-way-money-wise.

There's a lot more nice automatic trucks out there, just be patient? ;)

BTDT being patient (following my own dumb advice) and gave up but I was
wanting the rarer manual and in '90/'91 Bronco. After 2+1/2 years gave up
right after two different guys told me... "if it was a manual I wouldn't be
selling it".

The whole time was planning to swap out the M5OD-R2 Mazda transmission
for a ZF right-away anyhow, decided the heck with waiting and bought a
cheap automatic Bronco and an F250 parts truck.

Here's the ad...
http://www.panix.com/~alvinj/file12/BroncoAD

This is what a 125k Tucson Bronco looks like underneath...
http://www.panix.com/~alvinj/file12/BroncoTC.jpg
http://www.panix.com/~alvinj/file12/BroncoDSfront.jpg
http://www.panix.com/~alvinj/file12/BroncoDSrear.jpg

And this one shows the wear on the Bronco's original brake pad (125k)...
http://www.panix.com/~alvinj/file12/hoist7m.jpg

Swapped over the metal part since the newer ones have a small pedal...
http://www.panix.com/~alvinj/file12/pedal.jpg

Unless you want to swap stuff over for the fun of it. LOL :)
...I recommend not swapping from manual to automatic.

Alvin in AZ
ps- Where you at, Milk?
 
Last edited:
Thanks it funny b\c things r fallin in place for the 79 it has an auto in it already I live in ohio btw this truck is n southern ky so im probly gonna have to find a trailer to bring it home but drivin it home would be fun
 

Ford Truck Articles

Recent Forum Posts

Top